2007 f250
Thread Starter
|
New User
Joined: Jan 2011
Posts: 3
Likes: 0
2007 f250
I just got the truck and am trying to use the aux switches I am reading the manuel it says use the wires next to the fuse box which are not hot with the switches on. What am i doning wrong??
Token Redneck
Joined: Jun 2007
Posts: 9,337
Likes: 346
From: Breckenridge, TX
There are two sets of four wires under the dash. One bundle comes through the firewall and are blunt cut in the engine bay. The other set of four is bundled in over the e-brake pedal, they should be labeled with tags as "Aux 1-4".
FTE Legend
Joined: Mar 2009
Posts: 161,105
Likes: 8,089
From: North Bay Ont Canada
Hold on there, the 4 wires are above the main fuse box to the left of the column, remove the 4 bolts holding the fuse box up & let it hang on the wires then you will see the 4 wires up there.
GO TO THE TECH FOLDER there is a better explanatoin.
GO TO THE TECH FOLDER there is a better explanatoin.
FTE Legend
Joined: Mar 2009
Posts: 161,105
Likes: 8,089
From: North Bay Ont Canada
Fatboy if you look at the top of this page you will see FORUMS, run your curser over that then you will see SEARCH go there & fill in a few blanks for what you want & the info will come to you.
Thread
Thread Starter
Forum
Replies
Last Post
mattt181
1987 - 1996 F150 & Larger F-Series Trucks
19
Jun 12, 2023 12:06 PM
William
1961 - 1966 F-100 & Larger F-Series Trucks
2
Jan 28, 2010 03:35 PM
advancemotors
1999 - 2016 Super Duty
2
Dec 6, 2006 12:34 AM
