Cadillac Seats
Thread Starter
|
Logistics Pro
Joined: Feb 2000
Posts: 3,565
Likes: 9
From: Sun River St. George
Cadillac Seats
Got a line on some Cadillac seats with the intergral seat belts. These are leather and power. Not having to screw around installing seat belts would be a plus. Besides using Government Motors parts in my Ford this seems like a good idea. Has anyone here done this, considered this? I know these seats are thick and may cause some interference with the steering wheel but I am using a 53 wheel on a 78 Tilt so that should not be a problem.
Posting Guru
Joined: Dec 2010
Posts: 1,240
Likes: 2
From: Chino Hills
I have seen people do it on 67-72 GM trucks, and it looks cool when the rest of the truck is up to the same level.
As far as the integral seat belts. I would use a pretty big fender washers to hold the seats down to the body.
Other then that you'll have to raise them up a bit to clear you tunnel since they sit different in the car.
As far as the integral seat belts. I would use a pretty big fender washers to hold the seats down to the body.
Other then that you'll have to raise them up a bit to clear you tunnel since they sit different in the car.
