HPX Fitting Question
Thread Starter
|
Senior User
Joined: Sep 2008
Posts: 312
Likes: 0
From: Huntsville, Tx
HPX Fitting Question
Looking into making my own HPX, my question is though what size fitting and what type do i need for the plugs in the head? I have access to most any hydraulic fitting there is just gotta know what you order. Thanks in advance.
Hotshot
Joined: Oct 2003
Posts: 17,791
Likes: 99
From: Ashland City, TN
I've heard a few guys make their own, but in all honesty. buy one.
If it pops on you, your done for.
Well, not really, but you'll be outa oil quick, and motor will shut off.
talking 5k psi at times or more, with high heat hose thats .
yeah,
Hardline for the win buddy. =)
If it pops on you, your done for.
Well, not really, but you'll be outa oil quick, and motor will shut off.
talking 5k psi at times or more, with high heat hose thats .
yeah,
Hardline for the win buddy. =)
Hotshot
Joined: Jun 2007
Posts: 10,008
Likes: 7
From: Austin, TX
5k psi??? Try more like 3000psi. You might see 4000psi in a spike, but it should not see 5k or more.. ever. I do agree with William though. Buy one and be done with it. Either a stainless braided line or hard line either way. They are cheap enough that there is no reason to build your own IMO.
Thread Starter
|
Senior User
Joined: Sep 2008
Posts: 312
Likes: 0
From: Huntsville, Tx
Well see I work for Napa, and have access to all fittings and hoses that Gates offers, not to mention i can make a phone call or two and have stainless steel line on order for me, so i'm set as long as i know what i need to order.
