help!!!!!!
Thread Starter
|
New User
Joined: Dec 2010
Posts: 1
Likes: 0
help!!!!!!
i got a 1995 f-250 gas motor that is going down hill. my brother in law wrecked his 2002 dodge cummins. so i baught it off from him to do a engine swap. i don't know how to find anything out about doing it. i hear a lot of people doing it. thanks for any help you guys give.
New User
Joined: Dec 2010
Posts: 20
Likes: 0
Sounds like a lot of trouble! The 98 1/2 to 02 cummins is prone to injector pump failure due to poor design and lift pump issues, but if you are patient it would be a nice project to do.being that you have the whole truck makes it nice since you will need all the computers and wiring harness for the cummins. you can buy the engine adapter for that swap if i can find the card ill get you number. you might measure it out to make sure it will fit in your 95 being that the cummins is taller than the gas engine.
Hotshot
Joined: Jul 2002
Posts: 14,285
Likes: 12
From: Bend,OR
just so you know expect on dumping some coin into this swap because its not cheap. even having the motor already and what not you can still expect to pay way more then a reman motor would have cost ya.
browse thru this section though lots of cummins swaps.
browse thru this section though lots of cummins swaps.
Thread
Thread Starter
Forum
Replies
Last Post
cowgirlup11
1973 - 1979 F-100 & Larger F-Series Trucks
2
Apr 3, 2011 12:35 PM
