Double checking on wheel offset/backspace for 2003
Thread Starter
|
Elder User
Joined: Jan 2007
Posts: 807
Likes: 0
From: Houston, TX
Double checking on wheel offset/backspace for 2003
Hi all, after digging through numerous posts on aftermarket rims, I just wanted to double check with the SME's (Subject Matter Experts) here. 
I'm looking to buy a set of MotoMetal 951's in 18x9 for my 2003 F250 4x4.
According to what I'm seeing from various vendors, the 18x9 in 8/170 lug pattern comes in only -12mm Offset, and 4.5" Backspace.
Does that seem to be accurate and appropriate?
Undecided yet as to what to wrap them in. Have loved the BFG's I currently have on the stock 16x8 King Ranch rims, but am open to Nitto, etc, perhaps something a little more aggressive but not too over the top.
Thanks in advance!
I'm looking to buy a set of MotoMetal 951's in 18x9 for my 2003 F250 4x4.
According to what I'm seeing from various vendors, the 18x9 in 8/170 lug pattern comes in only -12mm Offset, and 4.5" Backspace.
Does that seem to be accurate and appropriate?
Undecided yet as to what to wrap them in. Have loved the BFG's I currently have on the stock 16x8 King Ranch rims, but am open to Nitto, etc, perhaps something a little more aggressive but not too over the top.
Thanks in advance!
Thread
Thread Starter
Forum
Replies
Last Post
