Terminator gauge
Thread Starter
|
Postmaster
Joined: Dec 2008
Posts: 3,340
Likes: 2
Sounds good and thanks for posting the information. I'm still waiting on your before and after videos of the FRX.
Cargo Master
Joined: May 2010
Posts: 3,047
Likes: 9
From: Snohomish, WA
PREMIUM SPONSOR
Joined: Feb 2009
Posts: 6,038
Likes: 73
Cargo Master
Joined: May 2010
Posts: 3,047
Likes: 9
From: Snohomish, WA
Got an update from Aeroforce!
I guess they have everything working except Injector Duty Cycle. Sounds like they are considering sending everyone's gauges out and when they get the fix for the duty cycle, the diesel guys can ship it back to them for an upgrade (I assume no charge). They said they would know for sure Tuesday or Wednesday what the final verdict would be.
I told them that Injector Duty Cycle is pretty important for the 7.3L guys and I would be willing to wait a month or so to get it with Injector Duty Cycle. If not I would prefer to send it in later and I will get my fuel pressure and oil pressure sensor installed and working. I know I went with the Aeroforce to get ICP, INJ DC, Oil and Fuel Pressure in a single gauge. Since I have AE not having DC isn't a huge deal for me, but is something I do want to monitor!
I guess they have everything working except Injector Duty Cycle. Sounds like they are considering sending everyone's gauges out and when they get the fix for the duty cycle, the diesel guys can ship it back to them for an upgrade (I assume no charge). They said they would know for sure Tuesday or Wednesday what the final verdict would be.
I told them that Injector Duty Cycle is pretty important for the 7.3L guys and I would be willing to wait a month or so to get it with Injector Duty Cycle. If not I would prefer to send it in later and I will get my fuel pressure and oil pressure sensor installed and working. I know I went with the Aeroforce to get ICP, INJ DC, Oil and Fuel Pressure in a single gauge. Since I have AE not having DC isn't a huge deal for me, but is something I do want to monitor!
Thread Starter
|
Postmaster
Joined: Dec 2008
Posts: 3,340
Likes: 2
Got an update from Aeroforce!
I guess they have everything working except Injector Duty Cycle. Sounds like they are considering sending everyone's gauges out and when they get the fix for the duty cycle, the diesel guys can ship it back to them for an upgrade (I assume no charge). They said they would know for sure Tuesday or Wednesday what the final verdict would be.
I told them that Injector Duty Cycle is pretty important for the 7.3L guys and I would be willing to wait a month or so to get it with Injector Duty Cycle. If not I would prefer to send it in later and I will get my fuel pressure and oil pressure sensor installed and working. I know I went with the Aeroforce to get ICP, INJ DC, Oil and Fuel Pressure in a single gauge. Since I have AE not having DC isn't a huge deal for me, but is something I do want to monitor!
I guess they have everything working except Injector Duty Cycle. Sounds like they are considering sending everyone's gauges out and when they get the fix for the duty cycle, the diesel guys can ship it back to them for an upgrade (I assume no charge). They said they would know for sure Tuesday or Wednesday what the final verdict would be.
I told them that Injector Duty Cycle is pretty important for the 7.3L guys and I would be willing to wait a month or so to get it with Injector Duty Cycle. If not I would prefer to send it in later and I will get my fuel pressure and oil pressure sensor installed and working. I know I went with the Aeroforce to get ICP, INJ DC, Oil and Fuel Pressure in a single gauge. Since I have AE not having DC isn't a huge deal for me, but is something I do want to monitor!
Cargo Master
Joined: May 2010
Posts: 3,047
Likes: 9
From: Snohomish, WA
Here is their SENSOR PAGE
I already have all my port adapters, now I need to determine where I pull my oil pressure from. I think I may put it in the HPOP reservoir in lieu of the plug, or maybe down on the block at my bypass filter port. The HPOP reservoir pressure should allow me to see the first sign of oil starvation if it ever happens, and that position will most likely show a lower pressure than on the side of the block. I am curious to what others think or have experimented with. I may just move it around and see what I get. Who knows I may even install another sensor and use a SPDT switch to see both of them with the gauge (individually of course), that is what I did for my dual trans temp sensors.
Super Moderator
Joined: May 2004
Posts: 29,380
Likes: 118
From: Central Coast of CA
Here's the email Joey said he got from Aeroforce:
Hello,
First of all, thank you for your patience in this matter that went on way too long.
Our testing from yesterday has shown that we can start shipping as early as Monday, or at least by mid week. It may take a weeks to clear out the current orders, at which time we'll start filling new orders for these FD gauges.
Orders will ship in the order that we received them. Unless we hear otherwise we will ship all orders received, so if any were cancelled let us know unless you already have done so. Please send this info. to Bob at orders@aeroforcetech.com.
Thank you again.
Aeroforce Technology Inc.
Todd Austinson
President
First of all, thank you for your patience in this matter that went on way too long.
Our testing from yesterday has shown that we can start shipping as early as Monday, or at least by mid week. It may take a weeks to clear out the current orders, at which time we'll start filling new orders for these FD gauges.
Orders will ship in the order that we received them. Unless we hear otherwise we will ship all orders received, so if any were cancelled let us know unless you already have done so. Please send this info. to Bob at orders@aeroforcetech.com.
Thank you again.
Aeroforce Technology Inc.
Todd Austinson
President
Cargo Master
Joined: May 2010
Posts: 3,047
Likes: 9
From: Snohomish, WA
It has been so long ago that I paid for mine it will almost feel like I got something free when it shows up! usually I wait between purchases to buy something big...........this time there is no need!
Thanks for posting it here.
Thanks for posting it here.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Cargo Master
Joined: May 2010
Posts: 3,047
Likes: 9
From: Snohomish, WA
Well got it from UPS tonight. Hooked it up and played with it a bit. For anyone curious about what they are or how to use them, I threw this video together. I honestly did not read the instructions, just started messing around.
YouTube - Aeroforce.mp4
YouTube - Aeroforce.mp4
Thread Starter
|
Postmaster
Joined: Dec 2008
Posts: 3,340
Likes: 2
Well got it from UPS tonight. Hooked it up and played with it a bit. For anyone curious about what they are or how to use them, I threw this video together. I honestly did not read the instructions, just started messing around.
YouTube - Aeroforce.mp4
YouTube - Aeroforce.mp4
Great video!! Thanks a lot for teasing me!!
If they were not on back order over Christmas I would of ordered one. I had to put something under the tree for the truck.