yesterday i realized that i have a race ready block it has H-beam rods, forged pistions, scat crank & a 503 lift cam. it's bored .040 over this 351w should be soild more than what i wanted. i just hope tha gt-40 heads with the eddy intake and 600cfm carb & shorty headrers will finish it off good.....

 

The heads should be fine if anything they have atleast been rebuilt. the carb might be a little smaller than it wants

 

well i'll see about the carb later on but for now it'll have to do..i also have to change out the gears from the 3.08's shift kit for the c4 that i have in it.