Power Locks - Keyless - remote start
Thread Starter
|
Junior User
Joined: Dec 2006
Posts: 57
Likes: 0
Power Locks - Keyless - remote start
Hello all,
I need some help here, something just is working for me. I am installing a remote start for my 97 F-350 7.3, and I cant seem to figure out how to get the door locks working on this thing. Its a Prostart CT-3471 TW two way system. The wires on the remote start system are:
(-)Negative door input
(+)Positive door input
(-)Lock output
(-)Unlock output
I have a wiring diagram and tryed hooking it up what seems logical to me and well it dont work
I tryed running positive door input wire to the breaker (black/white) then I tied into lock output wire with the lock wire on the truck (pink/yellow) and same with the unlock and nothing I tryed jumping wires all over the place just to see if i can trigger both locks without the switch, just cant seem to figure it out. I need some ideas here..
Thanks.
<!-- / message -->
<!-- controls -->
I need some help here, something just is working for me. I am installing a remote start for my 97 F-350 7.3, and I cant seem to figure out how to get the door locks working on this thing. Its a Prostart CT-3471 TW two way system. The wires on the remote start system are:
(-)Negative door input
(+)Positive door input
(-)Lock output
(-)Unlock output
I have a wiring diagram and tryed hooking it up what seems logical to me and well it dont work
I tryed running positive door input wire to the breaker (black/white) then I tied into lock output wire with the lock wire on the truck (pink/yellow) and same with the unlock and nothing I tryed jumping wires all over the place just to see if i can trigger both locks without the switch, just cant seem to figure it out. I need some ideas here.. Thanks.
<!-- / message -->
<!-- controls -->
