Flathead
Thread Starter
|
New User
Joined: Nov 2010
Posts: 13
Likes: 0
Flathead
Greetings,
I am in the early stages of restoring a '46 pickup. I would like to put a flathead V8 back in it. Any ideas where I could get one that is in good running condition for a reasonable price? I am in middle GA just south of Macon.
Jim43
I am in the early stages of restoring a '46 pickup. I would like to put a flathead V8 back in it. Any ideas where I could get one that is in good running condition for a reasonable price? I am in middle GA just south of Macon.
Jim43
Freshman User
Joined: Jan 2006
Posts: 35
Likes: 0
From: Fairburn, GA
I have the guy for you. He is the most well known flathead Ford expert around. You wont believe just how much stuff he has. He is semi retired but he and his son Jeff are doing select work. They will work on some "newer" stuff, just did an awesome job of De Smogging my '86 460. Located on the SW side of ATL 20 min from airport. Set aside plenty of time when you come visit, you will not believe the treasures he has there. Has a v-8 on a trailor ready to go totally built, make tears come to your eyes when he cranks it....
Harold "Putt" Smith 770-964-6973 or Jeff 770-757-8945
Tell him Tim Luther said howdy.
Harold "Putt" Smith 770-964-6973 or Jeff 770-757-8945
Tell him Tim Luther said howdy.
Thread Starter
|
New User
Joined: Nov 2010
Posts: 13
Likes: 0
Flathead
Greetings,
I called and had a nice talk with Jeff. These folks seem to be the exact one's I was looking for. I plan to go up and see them in the next week or so. Thank You so much for the info.
God Bless,
Jim
I called and had a nice talk with Jeff. These folks seem to be the exact one's I was looking for. I plan to go up and see them in the next week or so. Thank You so much for the info.
God Bless,
Jim
Freshman User
Joined: Jan 2006
Posts: 35
Likes: 0
From: Fairburn, GA
Glad to help out. These are both seriously straight up folks. If they tell ya something, count on it being honest. They will redefine the term "old school" lol.
I was serious about the built flathead on the trailor, sweet talk him into cranking it up.
Also check out Jeffs 65 with the 429 in it. Really sweet P/U.
Tim
I was serious about the built flathead on the trailor, sweet talk him into cranking it up.
Also check out Jeffs 65 with the 429 in it. Really sweet P/U.
Tim
Senior User
Joined: Feb 2011
Posts: 205
Likes: 0
Wow. I just sold a running flathead for cheap. It is supposed to be going into a 37 Ford Firetruck.
Trending Topics
Junior User
Joined: Feb 2011
Posts: 73
Likes: 0
From: Dacula ,GA
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
New User
Joined: Nov 2010
Posts: 13
Likes: 0
Thanks for the info. I am rebuilding a 1946 pickup. When I bought it it had a 1950 motor in it. The motor is badly rusted with the pistons locked up in the cylinders. One of the cylinders has the side blown out of it, so needless to say, I need a replacement. I would like to replace it with a 1950 or later motor so that the transmission and bell housing would still bolt up. I appreciate any help.
Jim
Jim
Thread
Thread Starter
Forum
Replies
Last Post
kens65fb
1948 - 1956 F1, F100 & Larger F-Series Trucks
5
Jun 17, 2017 12:09 AM
eberf
1948 - 1956 F1, F100 & Larger F-Series Trucks
13
Jan 25, 2017 11:02 PM
Jim and Austin
1948 - 1956 F1, F100 & Larger F-Series Trucks
16
Oct 6, 2016 05:49 PM
Jim and Austin
1948 - 1956 F1, F100 & Larger F-Series Trucks
26
Apr 1, 2016 05:29 AM
