Reversed Eye Measurements
Thread Starter
|
Junior User
Joined: Nov 2007
Posts: 67
Likes: 0
From: Hughson
Reversed Eye Measurements
I built a jig and decided to reverse the eyes myself on the stock springs for my 48 F1.
I am now wondering if anyone has a measurement of stock or replacement springs from the the center of the spring eye to the center of the other eye.
I have another set of stock springs but they are old and the measurements are different on either side but its around 34 1/4".
I hope this makes sense... i am trying to get the measurement so that i can make sure the wheels are centered in the wheel wells when i put these springs back on.
Has anyone else reversed the spring eyes themselves??
Thanks a lot.
I am now wondering if anyone has a measurement of stock or replacement springs from the the center of the spring eye to the center of the other eye.
I have another set of stock springs but they are old and the measurements are different on either side but its around 34 1/4".
I hope this makes sense... i am trying to get the measurement so that i can make sure the wheels are centered in the wheel wells when i put these springs back on.
Has anyone else reversed the spring eyes themselves??
Thanks a lot.
