Indented Circle above the ignition Switch
Thread Starter
|
Junior User
Joined: Aug 2010
Posts: 69
Likes: 0
Indented Circle above the ignition Switch
In my 1966 F250 cab there is indented circle above the ignition switch also one on the passenger side same place. Were these for the vent pulls? Was it an option or standard? I have a picture in my profile of it.
Thanks
Thanks
Post Fiend
Joined: Nov 2000
Posts: 6,060
Likes: 7
From: Glendale Arizona
Vent pull is still used on 65 66 F350s and up and 65 66 four wheel drives for the drivers side(exception being the 66 F100 4x4). passenger side received the new triangular vent on the kick panel. It is common to find the electric washer switch in this location in 65 an 66 F100 and F250 two wheel drives.
Garbz
Garbz
Post Fiend
Joined: Nov 2000
Posts: 6,060
Likes: 7
From: Glendale Arizona
The vent pulls are not an option on 61 thu 66. But as i state above they are only used on 65 66 four wheel drives and F350 up that use the old 61 to 64 instep type cab on the drivers side.
Garbz
Garbz
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 784
From: Simi Valley, CA
C1TZ8101890B .. Vent Cable Assy-includes **** / Right/Left is the same / Obsolete.
Original applications:
1961/64 F100/1100 / 1963/69 N/NT500/1000 / 1965 F100/250 4WD & F350/1100 / 1966 F250 4WD & F350/1000 / 1967/69 F800/1000.
Original applications:
1961/64 F100/1100 / 1963/69 N/NT500/1000 / 1965 F100/250 4WD & F350/1100 / 1966 F250 4WD & F350/1000 / 1967/69 F800/1000.
Thread
Thread Starter
Forum
Replies
Last Post
Tylus
2004 - 2008 F150
74
Oct 25, 2019 02:18 AM
cjhusky
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
6
Jul 1, 2009 09:18 PM
