When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hello, i am looking for a rear double tube style bumper from that came on some 1983-1988 Ford Ranger or Bronco II, in good shape, without rust or dents and with the end caps. If you have one or can get one in good shape and you want to sell it, please let me know, i am ready to buy one and i have cash!!! You can e-mail me pictures and info at billy617bob@yahoo.com or post it on here i guess, but i would perferr email. Thanks!!!
They are not that hard to make, bought 2 pieces of 2" sprinkler pipe one 5' long the other had threaded on both end and put caps on, then cut it down the middle and measured it out for the license plate, then welded to original brackets, cost $50.00
Wow...THANKS!!!!!!!!.....do you have any more pictures of it? Like the mounting brackets and the center where a tow ball thingy would mount? Is it an NOS or a reproduction? How thick is it? Did your truck have one from the factory?? Also, are those scratches on it? Did it come with them? How do you like it? Can you put a tow ball on it like an original? What does that sticker say on the center? Did it come with hardware? How did it come in a box? Was it in foam or something to keep it from getting damadged? Yeah, mine was missing the end caps when i got the truck, and the inside of the tubes are rusty and flaking. Also, i got rear ended, and it got dented on the rusty part, and now has cheese holes in it. If i couldent find one, i was going to do that with making one out of pipe.