hey Bill
Thread Starter
|
Hotshot
Joined: Dec 2005
Posts: 10,247
Likes: 7,666
From: Chino Valley, Arizona
hey Bill
I am looking for a transmission I think it is a warner T18 it is a 4 speed with granny gear and reverse is far right and up. correct me if I am wrong about it being a T18.
anyhow it is in a piece of equipment so I don't know what year to look for. the running gear is all F600 running gear and it originally had a commercial I6 240 cubic inch engine
anyhow it is in a piece of equipment so I don't know what year to look for. the running gear is all F600 running gear and it originally had a commercial I6 240 cubic inch engine
Post Fiend
Joined: Nov 2000
Posts: 6,060
Likes: 7
From: Glendale Arizona
Bart
Any 1965 T18 up until 72. The bell housing pattern for the trans is the same but the input shaft snout has a larger diameter for 73 up where it meets the bell housing. I do not know if the snouts interchange.
Garbz
T18 and T19s are very common in F Series.
Any 1965 T18 up until 72. The bell housing pattern for the trans is the same but the input shaft snout has a larger diameter for 73 up where it meets the bell housing. I do not know if the snouts interchange.
Garbz
T18 and T19s are very common in F Series.
Thread
Thread Starter
Forum
Replies
Last Post
TheWingnut
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
Aug 15, 2009 09:01 PM
Magical_Merlin
Clutch, Transmission, Differential, Axle & Transfer Case
2
Jul 20, 2008 08:18 PM
cliffrwarren
Clutch, Transmission, Differential, Axle & Transfer Case
6
Jul 17, 2005 09:56 AM
