Help uploading pics
Thread Starter
|
New User
Joined: Aug 2010
Posts: 18
Likes: 0
Help uploading pics
I have some ported head pics from the guy who ported my head and i want to post them up and get everyones comments. they were taken on a cell phone and emailed to me. how do i post them?
Cranky Old Guy
Joined: Mar 2008
Posts: 3,562
Likes: 6
From: Raphine, Virginia
Look at the bottom of the page for posting rules. It will say if you can post attachments. If so you can post directly from your computer. If not, you can load them to a hosting site like PhotoBucket and copy and paste img file into your post.
Thread Starter
|
New User
Joined: Aug 2010
Posts: 18
Likes: 0
Thanks gf, I think i got it. Mikes Porting Service is the shop name, $650 for
1. cut for larger valves (that I will supply)
2. Full port and polish including bowls, short side radius and combustion chamber polish
4. Valves deshrouded
3. .040-.060 shaved off
5. valve job
I will get better pics when i get the head back. He uses a superflow bench and is supposed to provide me with before and after flow numbers as well as cumbustion chamber cc's. this was a new head and is going on a 91 that has a hooker header, crane cam, e-fans and msd ignition.
1. cut for larger valves (that I will supply)
2. Full port and polish including bowls, short side radius and combustion chamber polish
4. Valves deshrouded
3. .040-.060 shaved off
5. valve job
I will get better pics when i get the head back. He uses a superflow bench and is supposed to provide me with before and after flow numbers as well as cumbustion chamber cc's. this was a new head and is going on a 91 that has a hooker header, crane cam, e-fans and msd ignition.
