wtf 6.0 took a ****

Reply Subscribe

Thread Tools

Search this Thread

Oct 20, 2010 | 04:05 PM

Ford67

Thread Starter

New User

Joined: Sep 2010

Posts: 15

Likes: 0

wtf 6.0 took a ****

just bought 03 6.0 was driving fine started running rouph and just shut off wouldnt start till morning and when it did it ran rouph and shut it off now wont start its leaking some oil now so high pressure oil pump???? or what??? please help thanks

Oct 20, 2010 | 04:10 PM

BPofMD

FTE Legend

Joined: Jul 2005

Posts: 65,938

Likes: 1,432

From: Millersville, MD

Start by reading through the tech folder up above.....

Check FICM voltage.....check battery voltage and alt output......do all the basics, first.

Oct 20, 2010 | 04:16 PM

Cowboy65

Elder User

Joined: Jul 2009

Posts: 919

Likes: 0

From: Smiths Grove, KY

Check out this thread which covers many of the basics:

https://www.ford-trucks.com/forums/8...condition.html

Oct 20, 2010 | 05:14 PM

69cj

Hotshot

Joined: Jul 2005

Posts: 13,834

Likes: 25

From: Middle Tn.

Check ICP fitting behind the turbo. Unplug it and see if it starts. Also if the pigtail has oil on it, it also needs replacing. Common on 03's.

Oct 22, 2010 | 04:37 PM

Ford67

Thread Starter

New User

Joined: Sep 2010

Posts: 15

Likes: 0

ran 7 codes low icp cylender 1 glow plug cylender 6 controbution it started and ran rough today oil all over back of the engine

Oct 22, 2010 | 04:59 PM

69cj

Hotshot

Joined: Jul 2005

Posts: 13,834

Likes: 25

From: Middle Tn.

Quote:

Originally Posted by Ford67

ran 7 codes low icp cylender 1 glow plug cylender 6 controbution it started and ran rough today oil all over back of the engine

ICP and pigtail is the best place to start in my op. Then clear codes and run. Ck. for more codes. 2nd guess would be the ficm after the icp and pigtail is replaced. Tech folder tells you how to ck. and repair/replace the ficm if that is bad.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump