2007 Escape Alternator replacement
Thread Starter
|
Freshman User
Joined: Sep 2004
Posts: 41
Likes: 0
2007 Escape Alternator replacement
I am in the middle of replacing my alternator, I have read all the posts I can find on the net about doing this and for the most part they are correct but are on older escapes. My 2007 escape has a heat cowling on the back side and a snorkle that wraps around the top of the alternator. one of the brackets for this shield is blocking access to the top mounting bolt and I cannot seem to get at the third bolt to loosen this bracket enough to get at the top mounting bolt. Can anyone shed some light on this cowling and how to get it off?
So far I have removed the axle and the side plastic shield .. Do I have to remove the exhaust to get at this bolt or??
Man what a PITA it is to do this....
So far I have removed the axle and the side plastic shield .. Do I have to remove the exhaust to get at this bolt or??
Man what a PITA it is to do this....
Thread
Thread Starter
Forum
Replies
Last Post
AXracer
1948 - 1956 F1, F100 & Larger F-Series Trucks
26
Jul 29, 2023 10:54 PM
yankeerebel
1973 - 1979 F-100 & Larger F-Series Trucks
11
Oct 29, 2016 07:41 PM
danlee
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
40
Feb 20, 2012 06:59 PM
SuperSabre
1961 - 1966 F-100 & Larger F-Series Trucks
5
Jan 17, 2012 11:02 PM
