or maybe its just me.
In the settings I have the remote start turned on but it does not work.
The strange thing is it worked last night when I got home?

 

Hit the lock button first. Then remote start it.

 

Lock - Start - Start. It should start and park lights come on along with AC settings

 

Also, after you got the remote start button, wait a couple seconds. If you see a green light, it started, if it blinks red, it didn't.

 

blinks red, no matter how many times I try

 

You may be pressing your buttons too fast. Try 1 second between button presses

 

Thanks for the tip, I tried both keys, fast, slow, etc.
It just does not work although it did at the dealer.

I will take it back for help

 

For the remote start after hitting the start button the second time do you hit and release or hold until it starts? Same for the push button. When you get in do you press and hold until it starts or press, release and wait for it to start?

 

I have been releasing after each click

 

**UPDATE**
cecilt had it right, I was doing it wrong (Doh)
Warming the truck up now :-)

 

I don't have push button start on my truck (have it on taurus), so maybe it's different on those models, but it's really not that sensitive. I've never really even thought too much about it. Just lock and double tap.
But come to think of it, I'm very dissapointing in the remote start on my Taurus, it only seems to work when the fob is close to it. I was able to get it to start last night from the inside of a restaurant, which surprised me.
so maybe the push button start vehicles have different sensors or software.
​​​​​​​Anyone else notice these issues?

 

All good here mine has push button start and the remote works the same as my 2011 did i do find that my 2014 and my 2017 work from farther then my 2011 did

 

LOL....reminds me of the Modern Family episode with Manny teaching Jay to "double click" He's says.."I am double clicking...see...double...click"...Manny...no..."d ouble-click"...lol

 

A side note if the truck rolls a code it prevents remote starting. It may not show any errors on the screen when you start the truck.

Dealer confirmed this while working with the SuperLemon truck. It would not remote start after a repair attempt. We went through everything on the truck and eventually plugged the computer in got a code from it and off to the shop again.

 

When you notice your loosing range on remote start or locking, unlocking it's time for a new battery in the remote. When you have a weak battery it looses range.