The factory bed-liner, is it Rhino, X-Line, or something different? It appears smooth and clean, but will it last?

 

From what I was told, the factory spray-in liner is similar to the Line-x but is Ford's own brand.

 

For my 2020 F-350 SCLB, I used Line-X standard $580 and a bed mat $135. When I sold the truck back to a FORD dealer, I kept the bed mat for my 2022 Lariat 6.7, SCLB and added the OEM spray-in liner. With almost every option, I expect to wait a year from my 12/10/21 order date. Heck, it may turn out to be a 2023 model after August.

 

I have it in my 15 and it has held up very well.

 

held up well on my 2013 with 7 years of hard use.

My 2021 has it and I think it is fine. I also have a dee zee bed mat to help since we are dealing with al vs steel.

 

The factory installed stuff looks pretty tough for sure when I've seen it on other trucks.

I had Rhino Liner installed not by dealer but by Zeibart for the dealer. It sucks for sure. I rented a small stump from Home depot and when it slid, it put a cut right into the Rhino Liner right down to metal. I took it in for repair, and sat for some time. They repaired it with what it looked to be JB Weld. At one point, I started the peel it off the tailgate. They hardly prepped the paint because it was lightly scratched. The liner is coming off the bed bolts. I haven't decided what I'll replace it with but when I do, I'll post up on my thread.

I am looking at doing a custom job with Monsta Liner.

Monstaliner do-it-yourself roll-on truck bed liner outperforms Herculiner Bed Liner, Duplicolor and Rustoleum Road Warrior

 

line x is what I have used before when I had to do a liner on my dime. Highly recommend that one and they give the military/first responder discount too.