Need To Kit The Holly
#1
Join Date: Sep 2006
Location: Island Southeast Alaska
Posts: 14,325
Likes: 0
Received 5 Likes
on
5 Posts
Need To Kit The Holly
It's on The FE in my 66. Last started was 5 years ago and once or twice a year before that. This time the throttle plates where stuck and had to take the carb off to free them up. Put it back on and drove it a 100 miles home. Runs like crap. Thinking the intake is sucking air as well.
Anyway It's a 4V but no tag on it. I need to know what kit to get for it. And the boys busted my camera. What can I tell ya about it to help figure this out. Thanks
Anyway It's a 4V but no tag on it. I need to know what kit to get for it. And the boys busted my camera. What can I tell ya about it to help figure this out. Thanks
#6
Look here, Holley Performance Products Carburetor Rebuild Kit 3-1407
Listed here: Holley Performance Trick kit, Fast Kit, Renew & Rebuild Kits Products
Google is your friend
It's a model 4160, https://www.ford-trucks.com/forums/6...ley-model.html
600cfm
Listed here: Holley Performance Trick kit, Fast Kit, Renew & Rebuild Kits Products
Google is your friend
It's a model 4160, https://www.ford-trucks.com/forums/6...ley-model.html
600cfm
#7
Join Date: Sep 2006
Location: Island Southeast Alaska
Posts: 14,325
Likes: 0
Received 5 Likes
on
5 Posts
Thanks Art. Another question is as the cork gaskets are prone to shrinking is there anyway or anything to soak then in that would help to get them back in shape to use? Back in the day as I remember it was common to buy a kit in which the cork gaskets had already shrank in the kit sitting on the shelf.
Trending Topics
#10
Join Date: Sep 2006
Location: Island Southeast Alaska
Posts: 14,325
Likes: 0
Received 5 Likes
on
5 Posts
Found the Kit at Summit. Looks like the gaskets aint cork but hard to tell from a pic. I will see what Nappa can come up with when in town today. Thanks again. I am pretty sure I will have to gasket the intake as well. This FE has low mileage on it since it was built. But it has been sitting for a very long time. It has the cast iron intake but it is ported so I want to use it over. Gonna have to rent a crane or a big kid to help
Thread
Thread Starter
Forum
Replies
Last Post
Part time
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
14
10-13-2016 07:16 AM
yargnitram
1961 - 1966 F-100 & Larger F-Series Trucks
1
10-09-2016 08:53 AM
old blue beast
1973 - 1979 F-100 & Larger F-Series Trucks
5
01-26-2013 09:07 AM
Jnissen04
1967 - 1972 F-100 & Larger F-Series Trucks
14
08-07-2011 01:38 AM