Superchips flashpaq....
#1
Superchips flashpaq....
I have the older Superchips programmer for my 7.3 thinking about upgrading to the newer Flashpaq. Does anyone know if the Flashpaq can read the oil pressure at the ICP? I could not find a answer in my searches. Thanks for the info!
https://www.superchips.com/#pn=onlin...=true&vfid=180
https://www.superchips.com/#pn=onlin...=true&vfid=180
#2
I don't believe the flashpaq will do anything except program and read codes much like the older version.
Id reccomend getting AE if you have a laptop.
Riffraff Diesel: Total Ford Enhanced Bundle
Id reccomend getting AE if you have a laptop.
Riffraff Diesel: Total Ford Enhanced Bundle
#4
I am looking at the 1855 and it says it gives live data. I figure ICP reading has to be part of that.
And it gives 0-60 and 1/4 mile times. There are 3 versions of the Flashpaq for the PSD.
Superchips 1855 Flashpaq Features
# Adjust shift points and firmness
# Adjust speed and engine rev limiter
# Electronically correct speedometer and transmission shifting for non-stock tires, wheels and rear-end gear swaps
# Read and clear check engine codes
# Real-time vehicle sensor display
# Data log driver and vehicle performance
# Internet updateable
And it gives 0-60 and 1/4 mile times. There are 3 versions of the Flashpaq for the PSD.
Superchips 1855 Flashpaq Features
# Adjust shift points and firmness
# Adjust speed and engine rev limiter
# Electronically correct speedometer and transmission shifting for non-stock tires, wheels and rear-end gear swaps
# Read and clear check engine codes
# Real-time vehicle sensor display
# Data log driver and vehicle performance
# Internet updateable
Thread
Thread Starter
Forum
Replies
Last Post
06greenstroker
Ford Truck Parts for Sale
0
12-13-2016 05:25 PM
greasolution
1999 - 2003 7.3L Power Stroke Diesel
11
09-22-2016 07:33 AM
wadestreet
1999 - 2003 7.3L Power Stroke Diesel
49
02-10-2012 03:31 PM