You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Ok, the calendar now says it is winter, even though the landscape says it has been for a bit... it definitely could be worse, it waited until December to get going on it...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Im working on getting my garage insulated. Oh boy its fun. Whats up with this storm thats comming for christmas? We going to get more snow or more Ice. Wonder how bad the roads will be.
__________________
2012 F-150 SCREW 3.5TT FX4 3.73
2011 Mustang GT Premium Auto 5.0
2010 Taurus SEL
1999 F-150 SCAB 5.4l Lots of Mods
I'm attempting to catch up on some of the work I need to get done for the last few months... I have a scrap job that got buried in the last snow, and this won't help any... At least I got the time sensitive part done before the snow. I still have to unload the trailer from the last haul, then go pick up a Blazer for $75...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
It was going good. They found a steam leak in one of the pipes going to our turbine. So, we have the turbine shut down, and hopefully they can fix the weld today. Other than that, going okay. Are you guys supposed to get the nasty weather that is coming our way today?
A bit of it, looks for the most part ot be going a bit north of me, we get to deal with more likely ice...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
Howdy Iowa folks... been meaning to stop in here, but those Nebraska guys keep me on a short leash... I'm always cutting through NW Iowa, so technically I'm as much an Iowa resident as Nebraska and South Dakota. Gets awfully confusing being in 3 states every day, lol.
I'm hoping that snow storm stays to the south, a little snow would be ok, but not the 15 - 20 inches they are hinting at. The Omaha people deserve it more than we do!
Hey there stranger! Wait til you get hit with a nice thundersnow... I went through a good number of them out to Huron. Worst one dumped over 2 foot on us. I was working in brookings, and they didn't get nearly as much, and seemed to think I should get in just fine. I had an 83 Trans Am to drive at the time, and it was over the top of my hood...another time I was running a 78 Cherokee, that thing would just keep on going through about anything...
__________________
the workhorse:86 F250 4x4 6.9 Diesel 4-spd, 4.10 axles
the other workhorse 92 F350 2wd crew cab,3.55 rear axle, 92 6bt Cummins, NV4500
the project: 78 F150 4x4 shortbed 351 auto Iowa Chapter leader, ASE certified parts specialist
Come on down and join us in the Iowa chapter, or your own local chapter!! Thanks, Roger
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
