Hi guys,

I have a 69-70 351W in my 51 F1 with what I think is a more or less OEM style radiator. I've found a hose for the bottom, but the top hose, from the t-stat housing on the pass side of the Edelbrock Performer RPM intake manifold to the inlet on the pass side of the radiator is giving me fits. I'm not at home so I don't have a good pic to post. I've been to several stores and haven't found anything that will fit without too much bending. I'm fine with buying a hose and cutting it to use a segment that fits, but I've been unable to find anything. I'd prefer to stay away from a flex hose partly because I think they're ugly and also because the shortest one I've found is still too long.

Is there any "known application" that will work? I'm tired of poking thru hundreds of hoses hunting for one that looks right.

Thanks! Tyler

 

Try calling the Girls at Mid Fifty. I bet they could tell just what ya need.

 

Good idea. T

 

These Girls deal with this stuff daily and I think could help ya out.
I have never dealt with them But many on here have and they have only
good things to say about them.

They may be in the Venders list at the top of this page.