Coolant Filter Installed!
#1
Join Date: Aug 2006
Location: DELAWARE, The First State
Posts: 47,273
Received 157 Likes
on
93 Posts
Coolant Filter Installed!
Yes I did it myself. It's not because I couldn't get any help since Chris offered to come down to do it.
It took me 3 hours to do it and I quite pleased with the outcome.
Here's the details:
1 hr to read, and re-read the directions and study the pictures.(2 full pages)
15 min. to install the filter housing.
15 min. to install the values and hoses on the fillter housing.
1 1/2 hrs to get up enough nerve to cut the hoses on the SD and install the T's.
And the results are in:
A normal F'er can do the job in under an hour with a lunch break. lol
It took me 3 hours to do it and I quite pleased with the outcome.
Here's the details:
1 hr to read, and re-read the directions and study the pictures.(2 full pages)
15 min. to install the filter housing.
15 min. to install the values and hoses on the fillter housing.
1 1/2 hrs to get up enough nerve to cut the hoses on the SD and install the T's.
And the results are in:
A normal F'er can do the job in under an hour with a lunch break. lol
#7
Join Date: Aug 2006
Location: DELAWARE, The First State
Posts: 47,273
Received 157 Likes
on
93 Posts
Trending Topics
#11
I did this George....looked nice and clean for about 3000 miles.....looks like I need to do it again. Really hard to see the coolent running into the tank from the filter.
Thread
Thread Starter
Forum
Replies
Last Post