https://www.etis.ford.com/vehicleSelection.do is as close as I can get with my 2004. The option list is interesting, but quite difficult to decipher for some things. Here's a section of my list that has some obvious options and some that are... say what?? I'm sure the neighbors are impressed with the last one in the list!!

• With Heated Rear Window
• With High Series Overhead Console
• With Unique Full Floor Console
• Adjustable Accl/Brake Foot Pedals
• Front Floor Carpet Mats
• Rear Floor Carpet Mats
• With Carpet Floor Covering
• I/P Insert - Level 1

 

Just did it for my 2008 f 250. Must be without the brackets.....

services.forddirect.fordvehicles.com/inventory/WindowSticker.pdf?vin=1FTgs5568hsui8h488hd

 

Coo!! thanks for the link

 

not sure what is going on but every time I try it it comes back with the following error:

<Response status="FAILURE" ttl="86400"><debug/><Error>com.forddirect.services.exception.InvalidA rgumentException: Argument : VIN- Invalid VIN passed.</Error><Message>Argument : VIN- Invalid VIN passed.</Message></Response>

 

</response>


Try clicking on this link. It will come up with someone else's sheet. Then edit the address and replace his VIN with your VIN.


fordlabels.webview.biz/webviewhybrid/WindowSticker.aspx?vin=1ftww31r98eb22233&ref=VL
<response ttl="86400" status="FAILURE"></response>


Your VIN would be the portion underlined as below.
vin=1FTWW31R98EB22233&ref=VL
<response ttl="86400" status="FAILURE">
</response>
<response ttl="86400" status="FAILURE">

</response>

 

But they only go back a few years - 4, 5, 6, I've forgotten. They purge the old data and add the new models.

 

still no joy...

The VIN entered was not found in our system. VIN requested is 1FTSW21PX6EA05992.

 

Good to see you. Where have you been hiding?

Mine does not show up and it we tested it last year.

Sean

 

according to the VIN decoder on here my truck is supposed to be a shortbed (LOL) but it is a longbed.

<dl> <dt class="grid_2 omega"> MFR model code </dt> <dd class="omega"> W21 </dd>
<dt class="grid_2 omega"> Body type: </dt> <dd class="omega"> Standard Bed </dd>
<dt class="grid_2 omega"> Pass Doors: </dt> <dd class="omega"> 4 </dd>
<dt class="grid_2 omega"> Alternative name: </dt> <dd class="omega"> 4WD Crew Cab 6-3/4 Ft Box XL </dd>
<dt class="grid_2 omega"> Alternative body: </dt> <dd class="omega"> Crew Cab Pickup - Short Bed </dd>
<dt class="grid_2 omega"> Drivetrain: </dt> <dd class="omega"> Four Wheel Drive </dd>
</dl>

 

It is just showing you the base configuration for a Super Duty. Most of that info is not part of the VIN code, so a decoder couldn't determine that info. It is misleading, I agree. There are better VIN decoders on the net that just give the facts.

 

worked for my 07 Kinda interesting to know all the options and original price. Wish it told me were it was originally shipped to.

 

I would love to see the original window sticker on mine.

 

Looks like that link finally died, none are showing for me.

This one seems to be working though:

 

That one tells me to "check back later, the window sticker has not yet been released for that vehicle".
Since it's a 2012 they must be running a little behind. Fortunately for me, I have the actual window sticker that came in my truck.

 

You pasted your VIN into that URL? Mine gives me that error when I paste it as-is without the VIN.