Exahust Replacement

Spiderman · #1 (**permalink**) 05-14-2008, 02:10 PM

Any of you guys know a good shop in the North end (King/Snoho line) area that does reasonably inexpensive exahust plumbing?
The stock manifolds on my 390 are leaking. Big suprise there huh.
As soon as I can find a set of headers that fit my camper special I'd like to have some 3" tube run out the back.
Thinking of doing the big single thru a Flowmaster or...

billy12360 · #2 (**permalink**) 05-17-2008, 12:40 PM

im running into the same problem. except, ive got the headers, and the 292. if you have any luck let me know... the only shop ive been to was about 300 dollars more then im willing to spend

65Ranger · #3 (**permalink**) 06-07-2008, 11:37 PM

Quote:

Originally Posted by Spiderman

As soon as I can find a set of headers that fit my camper special I'd like to have some 3" tube run out the back.

Aren't there plenty of local guys that make headers? I know a guy in Fairwood(S. Renton) that does and does a heck of a job.

Ford_Six · #4 (**permalink**) 06-08-2008, 12:21 AM

I used to make headers, but need to set my shop back up.
Mine aren't cheap though.