<o></o>Hello, I’m new to the site but not Ford trucks or forums.

<o></o>I’d appreciate your help researching the Dana 44 & 60 front drive axle’s found in Ford trucks.

I’m trying to put a photo graphical web page together to show the difference between the different FRONT axles.

<o></o>Here is a link to my start on this web page http://77cj.littlekeylime.com/Dana44_3.htm

I need a lot of picture (8-10 of just the front axle, see web page), and my last trip to the junk yard turned out very bad. There are less and less of these axle.
<o></o>I’m posting in this forum, as I need picture of the front axles on all these years I’d really like a picture for one truck of the following years.


½ ton Dana 44 front axle: 73-75, 76-77, 78-79 & a 77.5-79 supercap

¾ ton Dana 44 front axle: 69-75 small kingpins, 69-75 Larger kingpins

¾ ton Dana 60 front axle: 76-77 Dana 60 low pinion, 1977.5-1979 Dana 60 High Pinion<o></o>



Please let me know if you can help me out. Thanks <!--[if gte vml 1]><v:shapetype id="_x0000_t75" coordsize="21600,21600" o:spt="75" oreferrelative="t" path="m@4@5l@4@11@9@11@9@5xe" filled="f" stroked="f"> <v:stroke joinstyle="miter"/> <v:formulas> <v:f eqn="if lineDrawn pixelLineWidth 0"/> <v:f eqn="sum @0 1 0"/> <v:f eqn="sum 0 0 @1"/> <v:f eqn="prod @2 1 2"/> <v:f eqn="prod @3 21600 pixelWidth"/> <v:f eqn="prod @3 21600 pixelHeight"/> <v:f eqn="sum @0 0 1"/> <v:f eqn="prod @6 1 2"/> <v:f eqn="prod @7 21600 pixelWidth"/> <v:f eqn="sum @8 21600 0"/> <v:f eqn="prod @7 21600 pixelHeight"/> <v:f eqn="sum @10 21600 0"/> </v:formulas> <vath o:extrusionok="f" gradientshapeok="t" o:connecttype="rect"/> <o:lock v:ext="edit" aspectratio="t"/> </v:shapetype><v:shape id="_x0000_i1025" type="#_x0000_t75" alt="" style='width:24pt; height:24pt'/><![endif]--><!--[if !vml]--><!--[endif]-->

 

your link didn't work for me, What type of pics are you looking for ? on or off the truck , certain angles , particular sections, from the front from the rear , close ups, far away

 

Sorry about that, not sure why that happened and I can't edit the post....

Link --> http://77cj.littlekeylime.com/Dana44_3.htm
(link works in preview. Else just copy and past the above)

I'm looking for about 8-10 different Pictures of the front axle. The link has good examples, and bad.
1. Front short of truck
2. Front of axle, showing both knuckles
3. Front left side knuckle
4. Front right side knuckle
5. Rear of axle, showing one knuckle and the pumpkin
6. Rear left side knuckle
7. Rear right side knuckle
8. Side, showing bolt pattern and lock-out.
9. Pumpkin
10. Close up showing BOM. (Bill of Matierials number on the tube)

Thanks for any an all help!

 

'76 F150. I took these pictures of this axle when I had it for sale(its gone now.) I am sorry it does not meet your criteria, but at the time, I didnt think I needed any better pictures for "future reference".

 

Mr.N,
If you give me an email adress I'll send you some photos.I think it's to much to be loading here.

 

Don't be sorry, I'm just glad you posted them! Thanks!

 

Dang I'm too much of a to PM or e-mail you...


Save those pictures! I'll be sending you a PM.
Which truck?

 

I have a 77 F150 D44, but I swapped 8 lugs onto it for my 4wd conversion. If you want, I can still take pics for whatever you want, though.

 

Thank you very much for the offer!
but I'm trying to stick to all stock axle.

 

The truck in my gallery
I guess I can't PM you either

 

give me a few days

I appreciate the help, just need a few pictures.