WAFTE Archived Buy/Sell/Trade ADs
#588
Updated ad with new price;
1990 Ford Bronco - (Brand New OEM Crate Motor)
SOLD
1990 Ford Bronco - (Brand New OEM Crate Motor)
SOLD
Hello fellow PNW members!
Selling my in-law's Bronco after 22 years of faithful service. This truck has been babied it's whole life and might have actually been off the pavement 1 time. Daily driven by my mother-in-law until recently when it was replaced with a '15 Ford Explorer Sport. Owned and cared for by a Ford enthusiast with many useful upgrades and driven by "the little old lady" down the street.
The original engine was replaced this summer with a factory Ford Crate Motor (5.8L roller cam). The original motor ran fine and is available with the sale of the truck along with other spares and factory service manuals The crate motor was purchased a few years back with the intent of putting it in the Bronco and keeping the Bronco for years to come. Plans changed and the '15 Explorer came home with the in-laws so we decided to install the motor and put it up for sale. Currently the motor has about 200 total miles.
This truck has been run on ethanol free gas it's whole life as well.
I have included the link to the craigslist add below which includes pictures, more pictures can be provided on request. I will answer all of the questions I can, I have know this truck since 1995 when I first met my wife so I can tell you most all of the history, any questions I cannot answer I will ask my father-in-law to fill in the details.
I have spent a lot of time looking at other rigs for sale and can tell you this is probably the nicest, it not the nicest Bronco for sale in the PNW right now.
Please let me know if you have any questions!
Thank you & details below!
http://seattle.craig...5205318055.html
Same owner last 22 years, very clean in and out, daily driver, adult owned and driven, never taken off road, rust free, original paint
Features:
NEW OEM Ford 5.8L roller cam crate motor with less than 200 miles
New radiator
18" Ford electric fan with Flex-A-Lite controller
130 AMP Alternator
External coolant and transmission filters
K&N air intake system
Upgraded transmission cooler
Bassani 3" single stainless engine back exhaust system
Roadmaster spring system on rear
2" receiver with electric brake controller
Brembo front rotors with Wagner brake pads
KYB Shocks
Like new 31-10.5 r15 tires
A/C blows cold with 134A conversion
Overhead console and lighted sun visors from Eddie Bauer Edition installed
Tilt steering wheel
A-pillar gauges (Volts/Trans temp/Clock
Rear 3-point seat belts installed from a '93 Bronco including the addition of a doubler plate in the top
All accessories work including power windows, locks and cruise control
Only body damage is on RR caused by an unsecured spare tire swinging (see pictures)
Lots of spares available including factory manual set and the original 5.8L motor which was running fine and not consuming any oil when replaced. Engine was simply replaced due to mileage.
One of the, if not the nicest stock Bronco for sale in the PNW -- guaranteed to not disappoint!
More pictures available upon request
Serious inquiries only
--No trades--
Selling my in-law's Bronco after 22 years of faithful service. This truck has been babied it's whole life and might have actually been off the pavement 1 time. Daily driven by my mother-in-law until recently when it was replaced with a '15 Ford Explorer Sport. Owned and cared for by a Ford enthusiast with many useful upgrades and driven by "the little old lady" down the street.
The original engine was replaced this summer with a factory Ford Crate Motor (5.8L roller cam). The original motor ran fine and is available with the sale of the truck along with other spares and factory service manuals The crate motor was purchased a few years back with the intent of putting it in the Bronco and keeping the Bronco for years to come. Plans changed and the '15 Explorer came home with the in-laws so we decided to install the motor and put it up for sale. Currently the motor has about 200 total miles.
This truck has been run on ethanol free gas it's whole life as well.
I have included the link to the craigslist add below which includes pictures, more pictures can be provided on request. I will answer all of the questions I can, I have know this truck since 1995 when I first met my wife so I can tell you most all of the history, any questions I cannot answer I will ask my father-in-law to fill in the details.
I have spent a lot of time looking at other rigs for sale and can tell you this is probably the nicest, it not the nicest Bronco for sale in the PNW right now.
Please let me know if you have any questions!
Thank you & details below!
http://seattle.craig...5205318055.html
Same owner last 22 years, very clean in and out, daily driver, adult owned and driven, never taken off road, rust free, original paint
Features:
NEW OEM Ford 5.8L roller cam crate motor with less than 200 miles
New radiator
18" Ford electric fan with Flex-A-Lite controller
130 AMP Alternator
External coolant and transmission filters
K&N air intake system
Upgraded transmission cooler
Bassani 3" single stainless engine back exhaust system
Roadmaster spring system on rear
2" receiver with electric brake controller
Brembo front rotors with Wagner brake pads
KYB Shocks
Like new 31-10.5 r15 tires
A/C blows cold with 134A conversion
Overhead console and lighted sun visors from Eddie Bauer Edition installed
Tilt steering wheel
A-pillar gauges (Volts/Trans temp/Clock
Rear 3-point seat belts installed from a '93 Bronco including the addition of a doubler plate in the top
All accessories work including power windows, locks and cruise control
Only body damage is on RR caused by an unsecured spare tire swinging (see pictures)
Lots of spares available including factory manual set and the original 5.8L motor which was running fine and not consuming any oil when replaced. Engine was simply replaced due to mileage.
One of the, if not the nicest stock Bronco for sale in the PNW -- guaranteed to not disappoint!
More pictures available upon request
Serious inquiries only
--No trades--
#590
Thank you, much appreciated but I actually sold the truck today
#592
Not going to use my sleeper cab, the window opening is cut for a 70's-80's chev, so it would need the opening fiberglassed in to fit Ford back windows (which it was originally designed for...)
Here's the criagslist ad: Pickup sleeper cab
Mention your from FTE and I'll let you have it for $150
Sam
Here's the criagslist ad: Pickup sleeper cab
Mention your from FTE and I'll let you have it for $150
Sam
#595
WTB- 1970 F350 with good body and title. Doesn't need to run, or even have an engine, just needs to have a solid cab and nice front clip.
I'd take just about any 68-72 body right now, but I need the higher GVW of the F350 for my diesel project.
I'd take just about any 68-72 body right now, but I need the higher GVW of the F350 for my diesel project.
#596
I have a 20 gal rear tank that came out of a 79 2wd F250. No rust on the inside, exterior has been sandblasted so it's bare metal. Give it a wipe down with some solvent and it will be ready to paint. Been sitting in my garage for 2 years now so it's time for it to go.
$40 obo, located on Whidbey Island
$40 obo, located on Whidbey Island
#597
I have a 20 gal rear tank that came out of a 79 2wd F250. No rust on the inside, exterior has been sandblasted so it's bare metal. Give it a wipe down with some solvent and it will be ready to paint. Been sitting in my garage for 2 years now so it's time for it to go.
$40 obo, located on Whidbey Island
$40 obo, located on Whidbey Island
Is it the type that drops in where the spare tire goes?
Can you post a photo and hold a yard stick up to it?
Marry Christmas
Sean
6.0L Tech Folder
#599
Ford_Six is correct. Lives in the factory location between the frame rails and between the rear axle and the bumper.
I can't provide dimensions or pictures right now, since I'm still in the midwest for school. I'll be back in WA in under a week.
I can't provide dimensions or pictures right now, since I'm still in the midwest for school. I'll be back in WA in under a week.
#600
I have various Craftsman tools for sale. All of them in very good to like new condition. I don't need em anymore, too many duplicates in my tool box.
Various Almost New Craftsman Tools
Various Almost New Craftsman Tools