has anyone ever heard of a inline 8 440 if so right something
#3
has anyone ever heard of a inline 8 440 if so right something
GM divisions, ie. chevy, buick, olds, and other car makers (packard, etc.) made straight 8's back in the 30's and 40's. But don't know what their cubic displacement was. However, if our Ford I-6 is 300 cubic inches that's about 50 ci's per cylinder...so a similarly bored straight 8 would be about 400
(50 ci X 8 equals 400). I've always wanted to play with one of those old straight 8's but never had the bucks. Maybe one day.
(50 ci X 8 equals 400). I've always wanted to play with one of those old straight 8's but never had the bucks. Maybe one day.
#4
has anyone ever heard of a inline 8 440 if so right something
my father had a 37 Buick back in the Early 50's when he was in navy at pearl Harbor. MASSIVE ENGINE!!!! FLAT HEAD.
To get the head out they'd use a couple of crow bars, pry the front off the gasket and put pipe between the head and the block and roll it out off the front. Head weighed in the neighborhood of 350#.
TONS OF LOW END TORQUE! Don't know what C.I.D. was but they were Huge.
To get the head out they'd use a couple of crow bars, pry the front off the gasket and put pipe between the head and the block and roll it out off the front. Head weighed in the neighborhood of 350#.
TONS OF LOW END TORQUE! Don't know what C.I.D. was but they were Huge.
#5
#6
has anyone ever heard of a inline 8 440 if so right something
I know Jag had an I-8....or was it an I-12...i dont remember...just remembered it impressed me. I think it was 12. I know the guy that owns it...Ill ask him. He said that it flew.
Dan "Mudinford" MacDonald
Rather be pushing a Ford than driving a Chevy.
Like A Rock......In Water!
Dan "Mudinford" MacDonald
Rather be pushing a Ford than driving a Chevy.
Like A Rock......In Water!
#7
has anyone ever heard of a inline 8 440 if so right something
[font size="1" color="#FF0000"]LAST EDITED ON 09-Jun-01 AT 03:17 PM (EST)[/font][p]PAUL: GM based buses in late 50's/ 60's / 70's used either the 348/409 ("W" head (late 50's /early 60's)truck engine)or the truck version of the 427 / 454 big blocks.
There were some buses that actually used the big V-6 back then but they were'nt too popular (ran for @$%&).
G.M. stopped producing a straight-8 in mid/late 50's.
Larry
There were some buses that actually used the big V-6 back then but they were'nt too popular (ran for @$%&).
G.M. stopped producing a straight-8 in mid/late 50's.
Larry
Trending Topics
#9
#10
Thread
Thread Starter
Forum
Replies
Last Post