does a 1997 psd have a factory,computer controlled, max speed limiter (MPH)? if so what is the shutoff speed? mine never seems like its gonna quit. i burried the speedo the other day (it was a good day it was working), and it was still pulling hard. im gonna say i backed out of it arround 100 somewhere, but had plenty left.

 

I have never run it till it stops that I can remember. I know they will run well over 100 factory.

 

No they dont have a speed limiter but they do have a rev limiter.

Cowboy Steve

 

Really what is set at. I have missed a gear before and run it well up into the red

 

I know on my truck stock it redlines at 3200 or 3300rpm I believe. With my chip the rev limiter is removed. Go drive your truck and try and wrap it out, you'll notice the rev limiter when you get up in the RPM's

Cowboy Steve

 

I think I'll pass on that invitation. Thanks anyway.

 

my owners manual say it cant be reved past 3600 rmp i beleive. it says the only way to over rev is an incorrect downshift.

 

it'll be a definet first but i might be wrong then, lol. My truck with a chip will easily hit 3700-4000rpm's. I had a custom tuner done up for that tho. But in stock form with an automatic, i didnt think i could go over 3200rpm. If you have a stick it might not have a rev limiter.

Cowboy Steve

 

stock rev limiter is 3400, sticks have the same limiter but as said above an incorrect down gear cant be cured with the limiter

 

I knew I wasnt wrong. That just cant happen

Cowboy Steve

 

oh my watch me be off, i am havin second thoughts, it is either 3300 or 3400, pretty confident at 3400

 

Come on c00n be as confident as Steve and you can NEVER be wrong. If you don't believe me just ask him.

 

Never wrong my friends. Its a gift, what can I say

Cowboy Steve

 

OMG it is deep around here

 

yep, and it only gets deeper from here. I recommend waiters

Cowboy Steve