Ford Rear differential covers for 10.25" & 10.5" Rear axles
#122
#123
#124
#125
Alumimum Diff Cover
I will post the part# later... however I got a finned, aluminum diff cover for my 05 FX4 from the dealer for fifty-something dollars. Now the only catch is the 12 bolts are seperate and cost....no crap...almost as much as the cover. So I purchased my bolts from a bolt supply. I also found a gasket at O'riellly for less than 10 dollars, just my deal to use gasket.
#126
A little late to the party and I haven't posted for two years. I have a diff cover hardware question.
I still have my '97 F-350 and tonight I was swapping out the fluid in the 10.25" rear and I rounded the head on one cover bolt. I don't have a thread gauge but I can borrow one tomorrow if need be. A mechanic friend of mine has an assortment of bolts and he is thinking 5/16-18 off the top of his head.
Is that the consensus ?
Thanks for the assistance.
I still have my '97 F-350 and tonight I was swapping out the fluid in the 10.25" rear and I rounded the head on one cover bolt. I don't have a thread gauge but I can borrow one tomorrow if need be. A mechanic friend of mine has an assortment of bolts and he is thinking 5/16-18 off the top of his head.
Is that the consensus ?
Thanks for the assistance.
Thread
Thread Starter
Forum
Replies
Last Post
krooser
1987 - 1996 F150 & Larger F-Series Trucks
22
03-17-2021 11:32 PM
96_F250_Deezal
Clutch, Transmission, Differential, Axle & Transfer Case
15
02-02-2014 03:18 PM
housedad
Excursion - King of SUVs
6
09-27-2013 03:00 PM
Johnlwlr
1999 to 2016 Super Duty
5
04-21-2011 09:36 AM