ok guys i have a problem.....i started to change my plugs i got 3 of them out no problem....the backs need to come out yet.but on the passenger side the 3rd one from the front 2nd to the back something is really wrong with it..i put the spark plug socket on it go to turn it and it wont turn or grip we brought two new spark plug sockets thinking it was that but no we even tryed a 13/16 thinking maybe it was bigger but it wont even fit in the hole..do you guys get what iam saying?? has anyone ran into something like this??the motor is a 5.4 what can we do to get that one out?? ideas?? thanks guys... alan

 

It could have something down in the hole. Get a mirror and a flashlight and look down in there to see what is going on.

 

we have tryed that and theres nothing down there at all but a plug that wont come out...it is like the socket is bottoming out and that is why it can't grip the plug....

 

OK I was wrong there was a little rock down there!! Now the problem being I asked my wife to help me out. We got the plug out and ran into a problem getting the wire setted with the little bolt!! She kept telling me it was not going in right I tried she tried and then a big problem hit!! The head sheared off the bolt!! Now I have to figure out how to get the body of the bolt out and get a new one in to fix the problem! What can I do short of taking it to the dealer and having them fix it! I am so mad right now I am seeing red!!

 

short of asking someone on this board if they live close to me..if they would be willing to come help me and my wife we can give some gas money if need be may even have you stay and i can feed you steak and or beer we will take care of you

 

Buy an E-Z out in the correct size at your local harware store. Good luck.

 

id like ot know what happend??wii everything be ok if i did the ez out??