Where are the numbers that ID the rear end? the code for the axle on the door sill plate is "08". i couldn't find a plate when i looked on the rear and but it was caked with at least 1/4 inch thick with dirt and grease.

Nate

 

Shop Manual says Ford 9", 3.50:1, non-locking.

You oughta visit Stockman's site, he has a lot of info on the '67's.

http://www.67fordtruck.com

 

I found these numbers;
WDM - M
3.50 6LC 301

could someone decode these for me

Thanks
Nate

 

>WDM - M > These numbers tell what bearing size makes up the diff.

3.50 > Axle ratio > And L would be after the 3 if it was a Limited slip axle.

6LC = Date code

301 = which Plant built at code

You're welcome.


[font color=red]Dennis

Calgary,Alberta,Canada[/font]
[link:www.ford-trucks.com/guidelines.html|FTEModerator]

http://www.clubfte.com/users/mil1ion/Minimorleytruck.JPG

http://www.clubfte.com/users/mil1ion/Mil1ion.html

[font color=red]
Please Don't Ask Me Any Tough Questions,
"I'm Saving My Memory For When I Develop Alzheimer's" [/font]

[font color=blue]78 F-150 429CJ,Silver,Explorer Pkg.
[/font]