Wheels for an engine ?
#1
Wheels for an engine ?
I have a very nice set of aluminum 8x16 rims with BF Goodrich All-Terrain LT265/75-16 T/A tires on them. These came from a Suburban and will fit any '89-'98 Full-Size Chevy or GMC Truck, I have no use for them. What I do need is an engine for my '83 F250, I'm willing to trade these wheels for an old 351,400,460 or 6.9 diesel engine. I will rebuild the engine so it can be in parts as long as it's fairly complete. Below is a link with pictures of the wheels.
http://www.geocities.com/dutchdeluxe2004/pics.html
Bert
http://www.geocities.com/dutchdeluxe2004/pics.html
Bert
#2
Those are nice tires and wheels, but I have no motor...
Give the guys at Colorado Auto parts and salvage a call. You can pick up a yard motor (plenty of the displacements you are after, except diesel) for $75 or get one of the motors they pulled as running for I recall $125. Not too bad for a project if you ask me, but then my 390 came from there...
--Mike
Give the guys at Colorado Auto parts and salvage a call. You can pick up a yard motor (plenty of the displacements you are after, except diesel) for $75 or get one of the motors they pulled as running for I recall $125. Not too bad for a project if you ask me, but then my 390 came from there...
--Mike
#3
Thread
Thread Starter
Forum
Replies
Last Post
waterbuzzard
1999 to 2016 Super Duty
2
06-23-2011 09:39 PM
truthseeker
1997-2006 Expedition & Navigator
3
09-08-2009 03:31 PM
freeky1
1967 - 1972 F-100 & Larger F-Series Trucks
5
09-17-2002 06:04 AM