Hello Everyone -
I'm new to the forum - just spent the last year slowly restoring my 1960 F-100 - it is all stock and had 27K orig miles on it (really, I'm not kidding). It has a Custom Cab and the stock window washers, but all of the tubing is missing (except for a small piece). It has the orig washer fluid bag - but I can't find any illustrations or photos of how it all is supposed to be connected - anyone out there have the answer? I have an orig 1960 Shop Manual, but couldn't find a diagram - thanks to all for your help, and will post picts as soon as it is finished!!
Bruce

 

Do you have the old foot operated pump? It was routed to this pump from the bag, then up to the squirters on the cowl.

Barry

 

Hi Barry - YES!! It does have a pump lever on the floor!! I didn't know what that was, but it makes a pumping sound when I pushed it - THANKS HEAPS for the info - if you happen to have the same thing on your truck and have any picts, please send them, and thanks again!!
Bruce

 

Hi Bruce,

Here's a picture that might help.

https://www.ford-trucks.com/user_gal...oid=35346&.jpg

 

Hey - that was a great picture - thanks Kenny!!

 

Wow...This is wild, There are 2 Bruces and both own 60 F100's, my truck has the OEM bag and nozzles and no pump or tubes, Shame..missing parts, too bad its all gotta go..the retro rod thing happening here.

Nice pic Kenny

Glack (Bruce)

 

Forgot to mention...Both in Oregon...Man o Man

 

Pleas post a photo of where the nozzles are installed. I have a 57 and want to add a windshield washer.