My '06 F-250 6.0 quad cab 4X4 is a buy back and Ford removed all the stickers. Today I'm putting new LT275/65R20 BFG AT's on it. It's a DD and tows a few times a year using a weight distribution hitch. Can any one provide me with the best recommended tire pressure for this setup? I want to get good wear on the new treads.


Thanks

 

Go buy what the tire says on the sidewall... My guess is 50lbs empty to 75lbs loaded.

 

But the BFG site specifically says to not go by the sidewall pressure but to only go by the vehicle recommended PSI rating stated on the door pillar sticker. Problem - I don't have a pillar sticker.

 

Found a sticker in another thread. Looks like 65 PSI all the way around.

 

Here is mine off of a 2016 F-250 6.7 L.

 

Thank you much