2008 F250 6.4 Oil Filrer O- ring
#1
2008 F250 6.4 Oil Filrer O- ring
Does anyone have a good part number for a 2008 F250 6.4, oil filter "O" ring, or an parts house, that stocks them? Last week I had the oil changed, by a shop that accidently broke the O-ring installing the filter cap (no lubrication on the o-ring). I drove app 40 miles before the discovery, lost a gallon of oil, what a mess that made. I had to buy a new filter just for a O-ring. I now want to have a spare on hand, just incase.
#2
Your best bet would be to find industrial hydraulic seal or hose repair facility in your area and have them match it up if you want a spare. Im not sure ford sells it separate its rare this o-ring is ever an issue.
#3
#4
Yes it's hard to mess up. from what I have checked and personal experience lack of lubrication on a O-ring, it can break. A shop did the oil change, so I couldn't personally supervise the install. For the heck of it ,called the dealer for a price and stock check. The price quoted was in excess of $ 16.00, a complete filter was $18.00
#5
#6
I am very picky about the parts going in the truck, Ford filters, Shell Rotella T-6 syndetic oil.
I provide all parts and fluids, shop supplies labor ! I did have a conversation about the replacement/repair cost of a 6.4 (at their expense)
I will have a spare o ring at next oil change (match foe front the oil filter set)
I provide all parts and fluids, shop supplies labor ! I did have a conversation about the replacement/repair cost of a 6.4 (at their expense)
I will have a spare o ring at next oil change (match foe front the oil filter set)
Thread
Thread Starter
Forum
Replies
Last Post
ItsABeautClark
1999 to 2016 Super Duty
6
09-01-2010 10:15 AM
Aggie 460
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
01-02-2003 11:12 PM