My door locks all stopped unlocking and locking ! I've tried using the unlock switch on the passenger side as well & still won't work . it seems like it wants to fully engage but it just barley moves . very frustrating having to climb all over the cab every time I get in and out unlocking and locking doors .

 

Here you go...

 

http://www.ebay.com/itm/2-HIGH-QUALITY-POWER-DOOR-LOCK-ACTUATOR-MOTOR-12-V-/360364872475?pt=Motors_Car_Truck_Parts_Accessories&hash=item53e76b931b&vxp=mtr
There is a write up on using these somewhere. I did them a while back and they work awesome. Did all four doors for $20. much more powerful than the OEM were when new. It is a super easy install, I did all four in about 2 hours and that was soldering and heatshrinking the wires where i spliced them.

 

OOPS, that didn't belong here.
Mark

 

I seen that video already as I thought of the same thing but do you think all door actuators went out at the same time ???? It's kinda strange

 

i had 2 fail at the same time. If the locks are moving at all when you hit the switch, then that's your problem. It's not too bad of a fix, but it gets a little orthascopic.

 

i just ordered one for the driver side door, the ones i have it it now were put in 8 years ago when i got the truck.

 

Just bought all new ones thanks . wait on shipment to see if its the cure

 

Here is a newer version from the Excursion section. Same procedure.


https://www.ford-trucks.com/forums/1...hod-video.html

 

Thanks that vide seems a lot easier . I appreciate it !

 

No problem. I did it the long way myself, took some time to clean everything while I was at it.