Home page

Ok, they seem to have some things I cannot find elsewhere. Most specifically a mechanical fuel pump for my 351m that puts out 80gph at 8 pounds. Holley and Mr. Gasket quit making theirs and I cannot find another manufacturer. They also make an HEI distributor for the 351m. My problem is that the parts are so inexpensive I wonder if they are Chinese or what. I dont want to buy something just to have to buy it again in a year.

I cant find any corporate data on the company yet. So have any of you guys used their products? I mean, HEI distributor for under $60. Is that normal? Maybe I just expected it to cost more.

Edit: looks like they are more on their website, but the ebay prices are really low: http://www.ebay.com/itm/like/151524359908?lpid=82&chn=ps

And here's another one. A $50 distributor? http://www.ebay.com/itm/Ford-One-Wire-HEI-Conversion-Distributor-Complete-w-Coil-351C-351M-400-429-460/380453707078?_trksid=p2054897.c100204.m3164&_trkparms=aid%3D222007%26algo%3DSIC.MBE%26ao%3D1%26asc%3D20140407115239%26meid%3Df33bd3796bc544b3b544e10360304679%26pid%3D100204%26rk%3D5%26rkt%3D30%26mehot%3Dpp%26sd%3D151524359908

 

Anyone at all?

 

IMHO, there is really no reason with a carb to have any need for more flow than what the OEM units already have...6 psi is more than enough to carry the engine up to 6k+ rpm.

 

Over kill on the pump... 6psi.. and 30 gph.. is fine for 500hp...

and Cheap is for a reason. my opinion.

 

Ok. Thanks, guys! That's really a better answer. I thought I needed more.