Wastegate Actuator
#1
Wastegate Actuator
My story isn't long, but it's sad and frustrating.
The rubber elbow for the red line to my wastegate actuator was dry rotted and cracked, so I decided to replace it. Picked one up, removed the old one and put the new one on the end of the line. When I went to put it back on the actuator, the little tube was apparently rusted and snapped right off the actuator.
I have a spare, but it's early 99 and the rod is too short to reach the wastegate lever. If you happen to have a stock 99.5+ actuator laying around you'd be willing to part with, please let me know . . .
The rubber elbow for the red line to my wastegate actuator was dry rotted and cracked, so I decided to replace it. Picked one up, removed the old one and put the new one on the end of the line. When I went to put it back on the actuator, the little tube was apparently rusted and snapped right off the actuator.
I have a spare, but it's early 99 and the rod is too short to reach the wastegate lever. If you happen to have a stock 99.5+ actuator laying around you'd be willing to part with, please let me know . . .
#6
My story isn't long, but it's sad and frustrating.
The rubber elbow for the red line to my wastegate actuator was dry rotted and cracked, so I decided to replace it. Picked one up, removed the old one and put the new one on the end of the line. When I went to put it back on the actuator, the little tube was apparently rusted and snapped right off the actuator.
I have a spare, but it's early 99 and the rod is too short to reach the wastegate lever. If you happen to have a stock 99.5+ actuator laying around you'd be willing to part with, please let me know . . .
The rubber elbow for the red line to my wastegate actuator was dry rotted and cracked, so I decided to replace it. Picked one up, removed the old one and put the new one on the end of the line. When I went to put it back on the actuator, the little tube was apparently rusted and snapped right off the actuator.
I have a spare, but it's early 99 and the rod is too short to reach the wastegate lever. If you happen to have a stock 99.5+ actuator laying around you'd be willing to part with, please let me know . . .
Where did you get your red line and stuff. My lines are in good shape but I need new boots. Was thinking of this when I was putting it all back together.
#7
Trending Topics
#9
#10
#11
#12
#13
#15