Progress Update actually 1 year to the day!
#1
Progress Update actually 1 year to the day!
So poking around the web looking for ideas and parts for my build I checked in here and realized it was actually a year ago today that I uploaded some progress pics.
https://www.ford-trucks.com/forums/1...0-build-d.html
Build is moving along and truck should be ready within the next 2 months in time for spring.
I'm at the point now where I am looking at interior ideas and narrowing down what exactly it is I want in terms of design and styling, seat configurations and who to do it.
Hoping for some form of drivers bucket seat with a 1/2 bench of some sort.
I want the truck to seat 3 but I want a separate seat as to adjust height and tilt based on how my prosthetic legs are fitting at any point during a cruise or trip.
I have yet to see that configuration so maybe I'll be the first?
Last update showed the step marked out for cutting to accommodate the exhaust tip.
Truck was fully assembled and mocked up and then disassembled for body work and paint.
I suppose a lot of progress over the last year has been made.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Cab is painted in Toreador red which the posted pics don't do any justice.
Going to be very close to the red I had hoped to capture.
Once the truck is fully painted and assembled wet sand and polish the heck out of her to get that real wet look!
Link via the builder for my project:
Project Coyote F100 | D&R Hot Rod Shop
https://www.ford-trucks.com/forums/1...0-build-d.html
Build is moving along and truck should be ready within the next 2 months in time for spring.
I'm at the point now where I am looking at interior ideas and narrowing down what exactly it is I want in terms of design and styling, seat configurations and who to do it.
Hoping for some form of drivers bucket seat with a 1/2 bench of some sort.
I want the truck to seat 3 but I want a separate seat as to adjust height and tilt based on how my prosthetic legs are fitting at any point during a cruise or trip.
I have yet to see that configuration so maybe I'll be the first?
Last update showed the step marked out for cutting to accommodate the exhaust tip.
Truck was fully assembled and mocked up and then disassembled for body work and paint.
I suppose a lot of progress over the last year has been made.
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]
Cab is painted in Toreador red which the posted pics don't do any justice.
Going to be very close to the red I had hoped to capture.
Once the truck is fully painted and assembled wet sand and polish the heck out of her to get that real wet look!
Link via the builder for my project:
Project Coyote F100 | D&R Hot Rod Shop
The following 2 users liked this post by McMatty:
#6
#7
Trending Topics
#8
Went with the Budnik's. Were called "Spark" but when I clicked on the bookmark they appear to have been renamed since last year.
Now called "Chisel-6" from their 6 lug series.
Budnik Wheels - Driver Series - Chisel-6
I have checked out the split bench seats but I am a little concerned that most seem to have the middle seat attached to the drivers seat and not the passenger seat.
Like I mentioned before, depending on my constant changing comfort level with prosthetic legs, I need to tilt the seat up and down to relief pressure on the back of my leg as well as the overall ride height at times. I wouldn't want the middle seat attached to the drivers seat and risk interfering with a floor console if I move my seat up and on the odd occasion there are 3 people in the truck.
The list on the side of the truck is a photo from the builder quite a while back.
I'm merely the trucks owner with the vision and they are the ones with the talent and skill set. Gotta give the credit where it's due!
As for paint, I was trying to get as close as possible to the Candy Apple red used on a Limited edition (30 made) Custom Fender Stratocaster that I can't track down.
That's partly where the idea to use birds eye maple for the bed wood came from. The guitar had a maple fretboard and looks so good with the red.
If you guys know of anyone who puts out show car quality interiors in Ontario Canada, I would greatly appreciate names, websites, images, etc…
Currently waiting to hear back from one outfit who build something similar to mine and it was a 2013 winner.
Now called "Chisel-6" from their 6 lug series.
Budnik Wheels - Driver Series - Chisel-6
I have checked out the split bench seats but I am a little concerned that most seem to have the middle seat attached to the drivers seat and not the passenger seat.
Like I mentioned before, depending on my constant changing comfort level with prosthetic legs, I need to tilt the seat up and down to relief pressure on the back of my leg as well as the overall ride height at times. I wouldn't want the middle seat attached to the drivers seat and risk interfering with a floor console if I move my seat up and on the odd occasion there are 3 people in the truck.
The list on the side of the truck is a photo from the builder quite a while back.
I'm merely the trucks owner with the vision and they are the ones with the talent and skill set. Gotta give the credit where it's due!
As for paint, I was trying to get as close as possible to the Candy Apple red used on a Limited edition (30 made) Custom Fender Stratocaster that I can't track down.
That's partly where the idea to use birds eye maple for the bed wood came from. The guitar had a maple fretboard and looks so good with the red.
If you guys know of anyone who puts out show car quality interiors in Ontario Canada, I would greatly appreciate names, websites, images, etc…
Currently waiting to hear back from one outfit who build something similar to mine and it was a 2013 winner.
#9
#10
Join Date: Jul 2016
Location: Swan River Valley M.B Can
Posts: 3,365
Received 542 Likes
on
309 Posts
The following users liked this post:
#12
#13
The following users liked this post:
Thread
Thread Starter
Forum
Replies
Last Post
HVFDFIREFIGHTER1618
1948 - 1956 F1, F100 & Larger F-Series Trucks
11
07-10-2021 06:37 AM
bryanswens
1948 - 1956 F1, F100 & Larger F-Series Trucks
27
09-25-2010 11:33 PM