Anyone know of a spyder besides the e99 van spyder that is a 2 inch turbo outlet and 3 inch plunum outlets that is NOT for an intercooled setup? Im going with a D66 and am holding off on inter cooling it but i was wondering if there was any other options besides custom making one.

 

Make your own

 

What about the stocker with reducer boots at the plenums?

 

Do they sell reducer boots that short? If so that'd work. Just a matter of fitting a reducer boot in that little space between the outlets and the plenums. Ill do some searching and let you know what i find. Guess i could always cut em down.

 

Siliconeintakes.com they are 3" in length

 

Iirc the 3" plenums are a little taller

 

heres what I went with. This will be perfect till i get my intercooler setup ready. Thanks for the help guys.

http://www.summitracing.com/parts/vp...FQpcfgodcWYA6g

 

No problem, if they are going to just be temporary until you install ic, IMO I would get the ones at siliconeintakes.com and save $20