AOD with Summit carb.
#3
Yes i know they work with a holley , i have the AOD -TV corrector plate for it . I thought the summit was sorta cloned from a holley and was wondering if they cloned the linkage part too so that the holley corrector plate would work.
.
#4
I agree, buy a real Holley. But I think that we have been through this several times before on FTE, 750 cfm is too much carb for that engine unless you are going to highly modify it, in which case you vehicle's street manners will be compromised. Holley says that this is the most common mistake made.
Here is a link to their carb selector website:
http://www.holley.com/applications/CarburetorSelector/CarbSelection.asp
Here is a link to their carb selector website:
http://www.holley.com/applications/CarburetorSelector/CarbSelection.asp
Thread
Thread Starter
Forum
Replies
Last Post
markthompson999
Clutch, Transmission, Differential, Axle & Transfer Case
1
09-03-2010 11:41 PM
47mercurypu
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
3
07-12-2002 08:07 AM
1scott
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
5
01-09-2000 01:17 AM