has anyone ever replaced a radiator support 2001 f350.
I have bent the bottom of the support (earlier Thread).

I have everything off the front end and now its time to take radiator support off.
If I'm correct, it looks like I'm going to have to cut out some spot welds by the inner fender well, The radiator support is lapped in between 2 pieces of metal at fender.
I have looked and cant find any write ups on this for 2001 f350
If anyone has anymore info please chime in.

Thanks, Scott

 

Maybe this will help. It is a pdf from the Collision Repair section of my Ford manual. b3o~us~en~file=b3o1r001.pdf~gen~ref.pdf