I've got a '84 F-150, 300/I6, Offy D.P., efi manifolds and swapped to a Duraspark 2 ignition.


The carb I got was off a early 70's P.U. w/302 (carb# 64-5346) 2100

In the "Walker" carb kit they have a list of adjustable settings covering 70-74 P.U.'s

Which year's settings/adjustments should I use when I put this back together?

Also, there was no solenoid when I got the carb.

 

Use the year of the truck that the carburetor came off of. If the carburetor has a tag, that will tell you the year. For example, D4TE-### would mean 1974. The six digit number you listed is not the right number.

Not all carburetors have the solenoid.

 

The carb has a Holley reman. tag(paper sticker), the 64-5346 # is what let me know the carb is what it is. the other 2 #'s are 1598 and a barcode

 

The barcode is 816581

 

The 2100 model was used on ford trucks from 1963-75 ,Just look up a application no.# ,most will have the same spec.s for set up float etc.