So I found a Hinkler plow for my 88 250. Not sure on the model yet. It looks to be in pretty good shape anyone have any experience with them?

 

No experience with Hinkler, I run Westerns & Fisher.
Judging from their website, assuming it's a steel conventional plow, it's 12ga, which is just under 1/8", which is on the thin side... What's the application? If you're just plowing your driveway, it's probably fine. If you're plowing commercially, it might be a little light...

 

Yea I was looking at that. Ill just be doin our shop and drives around here not really commercially but I don't have any experience with them. Just Westerns and Meyer

 

if it is cheap enough to pay for itself before breaking, or in one season, it may be worth it. but i just go with name brand.
and i have all meyers plows. this spring i picked up a complete mounting carton, hoop, nightsaber lights with modules, E-60 pump, and a like new C-8.5 plow with new cutting edge for $600

last year i got the same setup with a beat plow for $300

 

Double post

 

Yea id really like a Meyer

 

Is it Hinkler or Hiniker? http://www.plowsite.com/forumdisplay.php?f=65 Here's a good snow plow forum for any plow specific questions you may have.

 

Its a Hiniker

 

Never seen one, but I've had good results with plowsite.com for info on Meyer and Boss plows that I've owned/worked on. You'll even see a few of the same usernames as FTE!

 

I'm on plow site. If you see my name floating around there. Haven't done too much. Just asking some things about my fisher speedcast.