Bump stops with pro comp springs?
#1
Bump stops with pro comp springs?
I recently replaced the front and rear axle housings on my V10 GAS 2000 X with a Dana 60 front and Sterling 10.5 rear from a 2002 Ford F250; at the same time I replaced the stock leaf springs with Pro Comp Springs.
The front springs are Pro Comp 22210
Pro Comp Suspension Systems 22210 - Pro Comp Lifted Leaf Springs - Overview - SummitRacing.com
The rear springs are Pro Comp 22415
Pro Comp Suspension Systems 22415 - Pro Comp Lifted Leaf Springs - Overview - SummitRacing.com
Neither of these springs have over load leaves. The bump stops on the X were shredded and I removed them entirely during the process.
My question is since the pro comp springs are solid springs with no overload leaf - do I need to reinstall new bump stops? If so does anyone know what brand/part I should get?
The front springs are Pro Comp 22210
Pro Comp Suspension Systems 22210 - Pro Comp Lifted Leaf Springs - Overview - SummitRacing.com
The rear springs are Pro Comp 22415
Pro Comp Suspension Systems 22415 - Pro Comp Lifted Leaf Springs - Overview - SummitRacing.com
Neither of these springs have over load leaves. The bump stops on the X were shredded and I removed them entirely during the process.
My question is since the pro comp springs are solid springs with no overload leaf - do I need to reinstall new bump stops? If so does anyone know what brand/part I should get?
Thread
Thread Starter
Forum
Replies
Last Post
miottimouse
1973 - 1979 F-100 & Larger F-Series Trucks
11
08-14-2010 08:20 AM