CEL with P0261 and P0200
#1
CEL with P0261 and P0200
Yesterday my CEL came on truck ran fine pulled my codes with A/E and got these DTC Cleared the codes and this morning the old lady had the truck and got the CEL again with the same codes I did a KOEO test and was good Checked FICM Voltage with A/E and it was around 46 47 48 volts
P0261 Cylinder 1 Injector Circuit Low
P0200 Injector Circuit
P0261 Cylinder 1 Injector Circuit Low
P0200 Injector Circuit
Thread
Thread Starter
Forum
Replies
Last Post
fordpride
1994.5 - 1997 7.3L Power Stroke Diesel
9
12-30-2011 11:13 PM
Ricson
6.0L Power Stroke Diesel
36
10-17-2011 08:22 PM