hey guys while my motor is out was really really thinking on doing my cups, has any one done it i would like some input, also can it they be taken out and put back in with out the tool? or dose any one have a tool they would loan out? thanks guys

 

i thought this was a good link check it out.
7.3 Power Stroke Diesel Fuel in Coolant replace the sleeves in the truck - YouTube

also jim at rosewood has a great deal on the tools and great prices on new cups and rings.
this is his site.
Rosewood Diesel Shop

hope this helps
mitch

 

Clay rents the tool

 

sweet, i found a set up for 325, but the cups compound and loctight is 100 bucks thats 225 for a one time use tool you no will claw ret just the tool// ill have to send him a pm

 

He rent just the tool and you could get the cup from him too

 

ok sweet man ill pm clay

 

Here ya go read on the page it tells you about the tool rental

Riffraff Diesel: Motorcraft 7.3L Injector Cup Kit

 

sweet mike you the man!!!! now go and tell me what i wanna hear on my other post dam it !! lol

 

Just used clays 6 months ago. Sweet little tool. Just plan on 10-12 hours. Take your time one tip I noticed that would've been helpful is make sure it is spotless before you put the new ones in. Your motor is out so it shouldn't take as long. But I highly recommend clays rental. Plus his customer service was awesome. He returned my phone calls and emails on labor day!

 

ok sweet man will do! now i have thought bout just buying the dam tool, i got lots of buddies and in mazy come in handy

 

pm sent
john