Help please,tryin to get to the standpipes/dummy plugs on a 06.What all has to come off the top before I can get to em? Also the book I got says I need to loosen the right side engine mnt. Is this nesassary? Can any one point me to a tech guide or write up with the info. I would greatly appricate it. I'm running out of time before I'll have to just put it back together and drive it for 7 more days,and I'm gettin tired of being stranded in the middle of the intersections.Thanks

 

You have to remove the valve covers and at least the oil rail on the passenger side to replace the stand pipe and dummy plug. The drivers side just requires removal of the valve cover. No need to loosen an engine mount, but you MAY want to remove the fender liner on the passenger side to make access to valve cover bolts easier.

 

Iv only played with my 03 but did remove that fender liner

take out coolant bottle, Ficm,pull alt,pull GPCM

 

I've posted instructions on other sites. No way to attach files on this site. If you cannot find the info PM me with a email address and I will try to get it for you.

 

IIRC - these videos might help (even though your truck is a later model year):

YouTube Videos of EGR and Oil Cooler Removal:
Ford 6.0 2003 EGR Oil Cooler R&R. - YouTube
Ford 6.0 EGR Delete And Oil Cooler R&R Video 2 of 2 - YouTube
srmastertech's Channel - YouTube
srmastertech's Channel - YouTube
srmastertech's Channel - YouTube

 

Thanks guys, Ive got the pass. side done, Don't have time to do the STC. now the driver side and hope for the best.