V10 Whipple supercharger drive belt pics.
#1
V10 Whipple supercharger drive belt pics.
Hi, I am new to the forum so forgive me if I dont know my way around yet. I know some times it is frustrating when the same topic gets brought up over and over again. I just purchased a 2002 X with a v10 and a whipple on it. Everything is present except the tensioner pulley bracket belt assembly is missing. The supercharger and crank pulley is all I have installed on the motor. I was wondering if anyone has any pictures of one that could possibly show me what I am trying to locate. In addition, any suggestions of where I would even start at trying to find one would be greatly appreciated. I stayed on the phone with a few places today and after waiting for an average of 15 minutes on hold, I gave up.
Any help would be greatly appreciated.
regards
Tom
Any help would be greatly appreciated.
regards
Tom
#3
#4
Accessory Drive — 5.4L, 6.8L without A/C
<TABLE cellSpacing=0 cellPadding=3 width="70%" border=1><TBODY><TR><TH vAlign=bottom>Item</TH><TH vAlign=bottom>Part Number</TH><TH vAlign=bottom>Description</TH><TR vAlign=top><TD>1 </TD><TD>8678 </TD><TD>Belt idler pulley</TD></TR><TR vAlign=top><TD>2 </TD><TD>10344 </TD><TD>Generator pulley</TD></TR><TR vAlign=top><TD>3 </TD><TD>3A733 </TD><TD>Power steering pump pulley</TD></TR><TR vAlign=top><TD>4 </TD><TD>8509 </TD><TD>Water pump pulley</TD></TR><TR vAlign=top><TD>5 </TD><TD>6312 </TD><TD>Crankshaft pulley</TD></TR><TR vAlign=top><TD>6 </TD><TD>6B209 </TD><TD>Drive belt tensioner pulley</TD></TR></TBODY></TABLE>
Accessory Drive — 5.4L, 6.8L with A/C
<TABLE cellSpacing=0 cellPadding=3 width="70%" border=1><TBODY><TR><TH vAlign=bottom>Item</TH><TH vAlign=bottom>Part Number</TH><TH vAlign=bottom>Description</TH><TR vAlign=top><TD>1 </TD><TD>8678 </TD><TD>Belt idler pulley</TD></TR><TR vAlign=top><TD>2 </TD><TD>6312 </TD><TD>Crankshaft pulley</TD></TR><TR vAlign=top><TD>3 </TD><TD>10344 </TD><TD>Generator pulley</TD></TR><TR vAlign=top><TD>4 </TD><TD>3A733 </TD><TD>Power steering pump pulley</TD></TR><TR vAlign=top><TD>5 </TD><TD>8509 </TD><TD>Water pump pulley</TD></TR><TR vAlign=top><TD>6 </TD><TD>6B209 </TD><TD>Drive belt tensioner pulley</TD></TR><TR vAlign=top><TD>7 </TD><TD>19D784 </TD><TD>A/C clutch pulley</TD></TR></TBODY></TABLE>
https://www.ford-trucks.com/forums/5...ml#post5243515
Stewart
<TABLE cellSpacing=0 cellPadding=3 width="70%" border=1><TBODY><TR><TH vAlign=bottom>Item</TH><TH vAlign=bottom>Part Number</TH><TH vAlign=bottom>Description</TH><TR vAlign=top><TD>1 </TD><TD>8678 </TD><TD>Belt idler pulley</TD></TR><TR vAlign=top><TD>2 </TD><TD>10344 </TD><TD>Generator pulley</TD></TR><TR vAlign=top><TD>3 </TD><TD>3A733 </TD><TD>Power steering pump pulley</TD></TR><TR vAlign=top><TD>4 </TD><TD>8509 </TD><TD>Water pump pulley</TD></TR><TR vAlign=top><TD>5 </TD><TD>6312 </TD><TD>Crankshaft pulley</TD></TR><TR vAlign=top><TD>6 </TD><TD>6B209 </TD><TD>Drive belt tensioner pulley</TD></TR></TBODY></TABLE>
Accessory Drive — 5.4L, 6.8L with A/C
<TABLE cellSpacing=0 cellPadding=3 width="70%" border=1><TBODY><TR><TH vAlign=bottom>Item</TH><TH vAlign=bottom>Part Number</TH><TH vAlign=bottom>Description</TH><TR vAlign=top><TD>1 </TD><TD>8678 </TD><TD>Belt idler pulley</TD></TR><TR vAlign=top><TD>2 </TD><TD>6312 </TD><TD>Crankshaft pulley</TD></TR><TR vAlign=top><TD>3 </TD><TD>10344 </TD><TD>Generator pulley</TD></TR><TR vAlign=top><TD>4 </TD><TD>3A733 </TD><TD>Power steering pump pulley</TD></TR><TR vAlign=top><TD>5 </TD><TD>8509 </TD><TD>Water pump pulley</TD></TR><TR vAlign=top><TD>6 </TD><TD>6B209 </TD><TD>Drive belt tensioner pulley</TD></TR><TR vAlign=top><TD>7 </TD><TD>19D784 </TD><TD>A/C clutch pulley</TD></TR></TBODY></TABLE>
https://www.ford-trucks.com/forums/5...ml#post5243515
Stewart
#6
I believe that is the tensioner for the factory serpentine set up. My accesories are belted and operating properly on a seperate plane. The supercharger must have had a different bracket that lined up with the supercharger and crank seperately. The crank pulley has two grooves, one for the accessories and the outer one lines up with the supercharger pulley. Thank you for looking.
#7
Trending Topics
#10
Thread
Thread Starter
Forum
Replies
Last Post
LEckart
Lightning, Harley-Davidson F-150, Roush F-150 & Saleen F-150
5
02-19-2010 01:52 PM
73FOMO
1987 - 1996 F150 & Larger F-Series Trucks
8
05-09-2009 02:24 PM